LED Turn Signal Flasher

Out of stock
SKU: EC08110 UPC: 641461081100
(7)
Regular price $23.95 USD
Regular price $24.95 USD Sale price $23.95 USD
Make sure to Select the Correct Option above before purchasing.
Send us an email at Info@Cyclemax.com
Give us a call at 330-225-1169

This is an LED turn signal flasher. This is made by Electrical Connection and is designed to restore the flash rate of the turn signals to a normal pace if any incandescent lamps are replaced with LED's. If you change any of your turn signal bulbs to LED's, you remove the load that the flasher needs to have the correct rate. The easy (and less correct) way to fix this is to add a 'load equalizer'.  This is nothing more than ceramic resistors. They create heat and have to be mounted away from plastic. Our LED flasher is self regulating with it's onboard SMD logic circuit so, it doesn't care if it is flashing LED's or incandescent bulbs. It's DOT approved and rated at 20 amps so you can continue to use regular bulbs too. This is a plug and play unit that will fit all Goldwing GL1800's and F6B's from 2001-2017. The unit comes with one plug that will be used on 2001-2005 bikes and another plug that will be used on 2006-2017 bikes.  These will also plug directly into and work perfectly on the 1988-2000 GL1500's as well. Note: Please keep in mind that the GL1500 has one flasher for the turn signals and another flasher for the emergency flashers. So, if you want both to work properly, you will need to purchase two flashers and change them both.  08110


Item:    EC08110    Electrical Connection  

Customer Reviews

Based on 7 reviews
100%
(7)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
Dion Potaracke
Works great

Works great and seems to make the lights brighter. Hardest part is getting to the back of the dash, but it works and is better than original

K
Ken S ( Canada)
No instruction for use on GL1500

The description on the web sight says it's suitable for the GL1500 which it is ( buy 2! As the hazard flasher and turn signal flashers are separate items for n the GL1500), but there are two connectors coming out if the back of the flasher relay.... use the female one to connect to the male 3 pin that you removed from the non LED flashers on the GL1500. A negative of this product is that there is no photo or diagram of it showing which terminal is for power In ( ie. B for battery or +ve, which is L for Load out to turn switch and then lights and then to ground, and which is negative E for Earth or ground is the third. There are industry standards for the position of these three terminals but this unit seems to reverse the positive and negative ( ( B and G) terminals so it's a hassle if you understand your bikes wiring etc etc etc just plug it in I guess.... worked on both Hazard and Turn signals for n my GL1500. Good company and excellent response and attempt to answer my questions but n answer was provided n the end so I found a local shop that wires cop cars and brought it to them and they helped me figure it out.... long story short close your eyes and plug it in and see if it works and breath a sigh of relief when it does! There are very detailed and excellent instruction fir GL1800 for installation.

R
Reznak Joe
Flsher harness

Work great and fast delivery thankyou.

j
james conder ll

Great

C
Christopher McKenney
GL1500 LED turn signal flasher

The LED turn signal flasher for GL1500 did not change the fast flash pattern

Check our some of our New Products